DDT Xchange
Put the geometry your lab uses on every implant position from a capture, line it up with the jaw scan and export a ZIP for Exocad. Free, in your browser.
Your files never leave this computer. No login, no patient names.
Four steps to an Exocad-ready ZIP
Everything runs on this computer and nothing is uploaded. Start with your capture, or try the sample case first.
Implant position file
Click the arch to choose its position file (or a mesh of the scan bodies), or drop the file on it.
Which arch is it for?
MicronMapper CSV · ScanAdaptor XML · iCam TXT · matrix tables (CSV/TXT) · JSON · ImplantPositions XML · or an STL, PLY or OBJ mesh of the scan bodies. A position file and a mesh can go together. Excel? Save it as CSV first.
Which scan body is in this capture?
Pick it from your geometries or load its file. It is fitted to every body to read the implant position: the connection, the axis and the index.
Imported
Implants
Replacement geometry
Pick what sits on each implant in the export. A pick for all implants takes you on to the next step.
Your geometries
Saved in this browser, on this computer.
Choose a geometry
STL, PLY or OBJ in the implant frame: origin at the connection, +Z along the axis, +X toward the index.
Apply to
Implants
Jaw scan
Add the tissue scan from the intraoral scanner, as STL or PLY, to align the implants to it. It is never changed: the export copies it byte for byte.
Drop the jaw scan here
or
STL or PLY (the color is kept)
Align and export
Line the implants up with the jaw scan, check the fit, then export.
Alignment
Not aligned yet. Auto align usually finds the position in a few seconds; if it doesn't, use guided points.
Guided points
Click on the jaw scan where each highlighted implant sits, aiming at the top center of its scan body. Follow the order 1–2–3–4.
Keyboard: turn the view with Shift + arrows, pan with the arrow keys, zoom with + and −, then press Enter to place the point under the crosshair.
By hand: drag an implant to move the set, Ctrl (⌘) + drag to turn it. Ctrl + Z undoes.
A surface fit is not a clinical validation. Check every implant before using these files.
Drag or use Shift + the arrow keys to turn the view; the arrow keys or Shift + drag pan; the wheel or + and − zoom. Press ? for every shortcut.
Keyboard: turn the view with Shift + arrows, pan with the arrow keys, zoom with + and −, then press Enter to place the point under the crosshair.
Keyboard: bring the crosshair onto a point (arrow keys pan, Shift + arrows turn) and press Enter. Backspace removes the last point; Esc ends.
Display
Section
The cut starts facing you; turn the view to see it from the side. Shift + wheel moves it.
Your case will appear here
Drop files anywhere in the workspace, or try the sample case.
Loading the workspace…
Distance to the jaw scanµm
Grey: not seen by the scan (under the gum)
3D view paused
The graphics card reset the 3D view. Your case is safe.
DDT Xchange needs a larger screen
The 3D workspace works on a computer, or on a tablet at least 768 px wide. Open this page there: there is nothing to install.
Formats, limits and good practice
What DDT Xchange reads, how far it goes and what to check before you use the files.
How it works
Arch and capture
Pick upper or lower and import the implant positions: a file from your photogrammetry or scanner software, or a mesh of the scan bodies.
Geometry
Pick the scan body or healing cap your lab uses. It lands on every implant, in the exact position. Or keep the bodies of the positions file, align with them and exchange afterwards.
Jaw scan
Optional: add the tissue scan and the implants line up with it automatically, or with three or four guided clicks.
Export
Check the fit on the color map and download one ZIP that opens in Exocad in a single coordinate system.
What you can import
- Implant positions: MicronMapper CSV (V1.4 and V1.6, any marker family: AXO, AHY, BTH…), ScanAdaptor XML, iCam TXT, matrix tables in CSV or TXT, JSON and ImplantPositions XML.
- Capture mesh: STL, PLY or OBJ of the scan bodies, alone or with a position file.
- Geometry: STL, PLY or OBJ in the implant frame (origin at the connection, +Z along the axis, +X toward the index).
- Jaw scan: STL or PLY; the color is kept.
- Not read: Excel (save it as CSV), PIC, Tupel and BEB projects, column-major matrices, quaternions and units other than millimeters.
Limits
- Jaw scan: up to 150 MB and 3,000,000 triangles (slower above 1,500,000).
- Capture mesh: up to 50 MB, 1,000,000 triangles and 64 scan bodies.
- Geometry: up to 25 MB and 500,000 triangles.
- Position files: up to 2 MB and 128 implants.
- Export: up to 512 MB. Millimeters only: nothing is ever converted.
Before you use the files
- A surface fit is not a clinical validation: check every implant.
- combined.stl joins the surfaces without merging or cutting them, so they can overlap.
- Round scan bodies don't show their rotation: check flats and hexes in Exocad.
- Your geometries live in this browser: export them now and then as a backup.
Mouse and keyboard
| Action | Mouse | Keyboard (3D view focused) |
|---|---|---|
| Turn the view | Right-drag, or left-drag on empty space | Shift + arrow keys, Page Up / Page Down |
| Pan | Middle-drag, Shift + drag, or both buttons | Arrow keys |
| Zoom | Wheel (toward the pointer) | + and − |
| Fit everything | Double-click | 5 |
| Views | View buttons | 1 Front, 2 Bottom, 3 Back, 4 Left, 6 Right, 8 Top (number row or keypad, as in Exocad) |
| Initial view (occlusal) | View buttons | 0 |
| Rotation center | Middle-click on a surface; on a tablet, touch and hold | Home (under the pointer, or at the center) |
| Transparency of what is under the pointer | Shift + middle-click | T (jaw scan) |
| Hide what is under the pointer | Ctrl or ⌘ + middle-click | — |
| Show what you hid | Ctrl or ⌘ + Shift + middle-click | S |
| Color map | Color map button on the view | C or D |
| Section | Shift + wheel moves the cut | P |
| Measure a distance | Measure a distance button, then click two points | R, then Enter at the crosshair |
| Select an implant (step 2) | Click it | Implant list |
| Move the implant set (step 4) | Drag an implant | — |
| Rotate the implant set (step 4) | Ctrl or ⌘ + drag anywhere (Shift: one axis) | — |
| Undo a move | — | Ctrl or ⌘ + Z |
| Place a guided point | Click on the jaw | Enter at the crosshair |
| Remove the last point (guided points, distance) | — | Backspace |
| Cancel guided points or the distance, close menus | — | Esc |
| Show this list | — | ? |
On a tablet: one finger turns the view, two fingers zoom and pan, a double tap fits everything, touch and hold sets the rotation center; move the implant set with the adjust panel (Fine: 5° and 0.1 mm per tap).
Questions about DDT Xchange
Are my files uploaded?
No. Reading, aligning and exporting all happen in your browser, on this computer. The only thing we receive is the email address you give us before your first download.
Which capture files work?
Position files from MicronMapper (CSV, V1.4 and V1.6) and iCam (ScanAdaptor XML or TransformedPoints TXT), tables of 4×4 matrices in CSV or TXT, JSON and ImplantPositions XML. You can also import a mesh of the scan bodies (STL, PLY or OBJ), alone or together with a position file.
My scanner gives me Excel, PIC or Tupel files. What now?
Save Excel sheets as CSV and import the CSV. Native PIC, Tupel and BEB projects can't be read without guessing their content: export the implant positions as CSV or XML from the scanner software.
Which geometry should I pick?
The one that should sit on the implants in Exocad, usually the scan body or healing cap you can see in the jaw scan. Its file must use the implant frame: origin at the implant connection, +Z along the implant axis toward the top, +X toward the index. If your positions file already holds the bodies the jaw scan shows, pick “No exchange”, align, and exchange afterwards: the alignment stays.
What do RMS and the color map tell me?
RMS is the typical distance between the implant surfaces and the jaw scan, on the part the scan sees: what lies under the gum is left out. The map colors every point from green (0 µm) to red (100 µm or more), and grey where the scan can't see the surface. A low RMS and a mostly green map mean the surfaces line up; they don't replace a clinical check.
Why does it say the rotation is unknown?
A round scan body looks the same from every side, so its rotation around the implant axis can't be read from the scan. Position and axis are still exact. If your replacement has a flat or a hex, check its rotation in Exocad.
Auto align got it wrong. What can I do?
First check "Surfaces to match": pick what the jaw scan really shows on the implants. Then use guided points: click the top of three or four implants on the jaw, in the order shown. You can also drag the implant set close by hand and press "Refine from here".
Where are my geometries saved?
In this browser, on this computer. They don't follow you to another computer, and clearing the site's data removes them. Use "Export geometries" to keep a backup or to move them.
Why do you ask for my email?
DDT Xchange is free. We ask once per browser, before the first download, to send you occasional news about our tools, libraries and courses. You can unsubscribe at any time.
Which browsers work?
Recent Chrome, Edge, Firefox or Safari on a computer, or on a tablet at least 768 px wide, with WebGL 2. Large jaw scans need a computer with enough memory.
Rather have us design it? Send us the case.
Our team designs All-on-X, bars and bridges in Exocad from your scans. Book a consultation or write to us.

